Quick Answer
Thermage FLX or Onda Lifting — how do I choose?



Thermage FLX and Onda lifting get compared often, though they work on different layers. Thermage heats the dermis to firm skin that has lost its surface tone; Onda’s microwave reaches the fat layer beneath a fuller jawline. Your physician reads that distinction on your own face at RE:BERRY near Gangnam Station in Seoul.
Choose by the layer your concern lives in. Thermage FLX heats the dermis, the skin's own support layer, so it firms skin that has thinned and lost its surface tone. Onda lifting sends microwave energy deeper, into the subcutaneous fat, so it addresses a fuller jawline or chin where soft tissue is the issue. When both a slack skin surface and underlying fullness are present at once, the physician at RE:BERRY in Gangnam plans them as complementary steps on separate layers.
Benefits & Results
What Each Path Delivers, and How They Work Together
- Layer-matched choice: Thermage FLX for skin that has lost surface firmness, Onda for a fuller jaw or chin where subcutaneous fat is the concern. The physician reads which applies before either is booked
- A dermal skin-quality result from Thermage: surface tone, texture, and fine crepey looseness improve because the energy stays in the skin's own support layer
- A fat-layer contour result from Onda: microwave energy reaches deeper soft tissue, refining a fuller jawline or chin at a depth Thermage cannot reach
- When the skin has slackened and fullness sits beneath it at once, the two are staged on separate visits so each layer is treated without over-treating the other
- Same physician from the tissue reading through delivery to review. Your case at RE:BERRY Gangnam stays with one practitioner through the whole plan
- Genuine, MFDS-registered devices. On the Thermage path, a sealed single-use tip is verified in front of you, and your skin is documented under standardized clinic lighting
Effects & Progress

Dermis-Layer Skin Firming

Texture and Pores Refined Together

No Injections, Same-Day Life

Genuine Fourth-Generation FLX Platform
How Your Physician Chooses — 4 Steps from Layer Reading to Aftercare

The first step is reading tissue, not choosing a machine. Your physician examines and gently pinches the face and jawline to separate two problems that look alike in a photo: skin that has thinned and lost its surface firmness, and a jawline that has grown fuller because subcutaneous fat sits beneath it. Thermage FLX is built for the first, heating the dermis to tighten the skin envelope. Onda is built for the second, sending microwave energy deeper into the fat layer. When both are present, the physician notes the balance so the plan can address each layer in turn, one device to each job.

Once the target layer is clear, the physician plans the matching session. For a dermal, skin-tone concern the plan follows the Thermage FLX path: the skin is cleansed, a topical numbing cream is applied for comfort, a treatment grid is transferred to guide even spacing, and the sealed single-use tip is shown to you and confirmed before it is opened. The pass pattern is drawn from where your skin has lost firmness, so energy lands across the dermis where texture and laxity need support. There is no fixed stencil.

On the Thermage FLX path, the physician delivers the radiofrequency across the mapped dermal zones, and the platform measures the skin and re-tunes energy before each pulse while contact cooling shields the surface. You feel a brief deep warmth with each pass, eased by the handpiece vibration. If the reading pointed to soft-tissue fullness, that concern goes to Onda's deeper microwave path, which targets the fat layer at a greater depth. The physician keeps the two on separate plans, since they act on different layers and are not interchangeable within a single pass.

A cooling pack and regeneration cream soothe the skin right after treatment. Embossing and mild bruising may last 2–5 days; avoid sauna, alcohol, and intense exercise on the day. We recommend 3 sessions at 3–4 week intervals, then maintenance every 6–12 months.
Treatment Process
Comparison
Thermage FLX vs Onda Lifting — Reading the Two by Target Tissue
| Criteria | Thermage FLX (RE:BERRY Gangnam) | Onda Lifting (Microwave) |
|---|---|---|
| Energy type | Monopolar radiofrequency (RF) | Coolwaves microwave |
| Target layer | Dermis, the skin's own support layer | Subcutaneous fat, deeper beneath the skin |
| What it addresses | Skin that has thinned or lost surface tone; crepey texture, pores, a slack skin edge | A fuller jawline or chin where the concern is soft-tissue fullness rather than the skin surface |
| Kind of change | Skin-quality: the surface firms and refines | Contour: soft-tissue fullness is reduced |
| Sessions | Single session for the treated area | Often planned as a short series |
| Downtime | None; same-day makeup and flights | None; same-day return to daily life |
| How the result builds | Early firmness in days, main renewal over 2-3 months | Contour softens over the first few weeks |
| When combined | Firms the slack skin envelope | Reduces the fullness beneath it, staged on a separate visit |
Sources: KHIDI 2025 Medical Tourism Survey; manufacturer device specifications; RE:BERRY clinic records (verified).
Monopolar RF heats the dermis, the skin's own support layer, so the surface firms and refines. It does not add or remove volume
Microwave energy reaches deeper into the subcutaneous fat, the layer Thermage does not target. It is often staged alongside RF when the skin is also slack
Why This Matters
The heart of this comparison is depth. Thermage FLX is monopolar radiofrequency that heats the dermis, the living support layer of the skin, so its result is a firmer, better-toned surface. Onda uses microwave energy that passes through the dermis and warms the subcutaneous fat, so its result is a reduction in soft-tissue fullness. Because they act on different layers, one cannot substitute for the other. A jawline that has both a slack surface and underlying fullness is a two-layer problem, and the physician at RE:BERRY Gangnam plans a step for each.
In practice the useful question is which layer your concern sits in. Pinch the skin along the jaw. If what moves is thin, loose skin, the dermis is the target and Thermage FLX is the fit. If what you feel is soft fullness that the skin merely drapes over, the fat layer is the target and Onda is the fit. The whole point of reading tissue first is to name the layer before anyone names a device. When both layers show up together, the two treatments cover them in sequence.
KHIDI's 2025 international patient survey found 41.4% of respondents rank keeping the same doctor throughout as their leading criterion. At RE:BERRY the physician who reads your target layer plans the session, delivers the energy, and reads your review. There is no handoff between the assessment and the treatment, and none between staged steps if both layers are addressed.
The Boutique
A Fourteen-Thousand-Square-Foot Hush Above Gangnam-daero
Step past the black gallery facade and the bustle of Gangnam-daero falls away. Fourteen thousand square feet of hushed corridors, marble installations, a cascading water feature and fully enclosed consultation suites — arranged so you rarely cross paths with another guest, because our appointment-first diary keeps every hour deliberately underbooked.
(1,322 m²)
Suites
KI Tower, Gangnam-daero
Station Exit 10
More guides on this treatment
Your Doctors
Your Medical Director

Dr. Yoon-Gon Ryu
Chief Director
"The first thing I settle is which layer your concern actually lives in — surface skin that has lost its firmness answers to Thermage's dermal heating, while a softer, fuller jawline is a fat-layer question that belongs to Onda, and reading that difference on your own face is what keeps me from putting the wrong energy in the wrong place."
- Medical Director, RE:BERRY Aesthetic Clinic Gangnam — Korean MOHW Medical License No.131644
- Manufacturer-appointed invited to teach injection and energy-device technique to Korean peers
- Regular Member, Korean Academy of Aesthetic Medicine
- Co-manages every case with Dr. Yejin Oh (Korean MOHW Medical License No.144238)
- Featured in Authority Magazine (2026)
Medically reviewed by Dr. Yoon-Gon Ryu, CEO / Medical Director, RE:BERRY
Pricing
Published Prices at RE:BERRY Gangnam (Regular Rates, VAT Excluded)
From ₩1,990,000 (about $1,421)
Consultation-based, quoted at your free consultationGet Your Personalized QuoteLimited Time Offers
October – December 2026 Promotions
Exclusive packages for international patients. Swipe to see all offers.
October – December 2026 PROMOTION
Timeline
What to Expect
- 01
Session finished the same day on either path. Mild warmth or pinkness fades within hours, and makeup, flying, and dinner plans are all fine
- 02
On the Onda fat-layer path a fuller contour begins to soften; on the Thermage dermal path the skin often already feels denser before the visible firming peaks
- 03
The main renewal window for the dermal path. Skin tone and texture keep improving as new collagen forms in the warmed dermis
- 04
A dermal-path result generally holds well past the first year. Where both layers were treated, the physician sets the spacing before any repeat step
Timeline · What to Expect
- Right after
First days: on the dermal path, early firmness appears as heated collagen contracts. Mild warmth or pinkness settles within hours, and same-day makeup and travel are fine on either path.
- After 2 weeks
Weeks 1–4: if the fat-layer path was chosen, a fuller jaw or chin contour begins to soften; on the dermal path the skin often already feels denser to the touch.
- After 1–3 months
Months 2–3: the main renewal window for the dermal path. Skin tone and texture keep improving as new collagen forms in the warmed dermis. Response speed varies by individual.
- 6–12 months
Maintenance: a dermal-path result generally holds well past the first year, and where both layers were treated your physician sets the spacing before any repeat step at RE:BERRY.
Clinical Science
The Evidence Behind Heating the Dermis vs Heating the Fat Layer
The two treatments separate most clearly by the layer their energy is engineered to reach. Thermage FLX is a monopolar radiofrequency device whose current passes between the treatment tip and a return pad, and tissue resistance converts that current into heat throughout a broad dermal volume. Histological and ultrastructural analysis of skin treated with this monopolar RF platform documented immediate partial denaturation of collagen fibrils followed by increased collagen expression during repair. That two-phase mechanism accounts for both the early firmness and the tightening that keeps building for months, and it is why the result shows up in the skin surface itself.
Zelickson BD, Kist D, Bernstein E, et al. Histological and ultrastructural evaluation of the effects of a radiofrequency-based nonablative dermal remodeling device: a pilot study. Arch Dermatol. 2004;140(2):204-209. doi:10.1001/archderm.140.2.204
That dermal mechanism is supported at clinical scale. A physician survey covering 5,700 monopolar RF facial treatments found the multiple-pass, moderate-energy protocol, the approach used at RE:BERRY, produced visible tightening in the large majority of cases at six months, with markedly better comfort than the original single-pass, high-energy technique. A multicenter periorbital study of 86 subjects likewise recorded objective tissue elevation after a single session. The measurement points to a genuine, lasting change in the skin's supporting layer.
Dover JS, Zelickson B; 14-Physician Multispecialty Consensus Panel. Results of a survey of 5,700 patient monopolar radiofrequency facial skin tightening treatments: assessment of a low-energy multiple-pass technique leading to a clinical end point algorithm. Dermatol Surg. 2007;33(8):900-907. doi:10.1111/j.1524-4725.2007.33191.x
Fitzpatrick R, Geronemus R, Goldberg D, Kaminer M, Kilmer S, Ruiz-Esparza J. Multicenter study of noninvasive radiofrequency for periorbital tissue tightening. Lasers Surg Med. 2003;33(3):232-242. doi:10.1002/lsm.10225
Microwave-based lifting works at a different depth. Because the two energies target different layers, evidence gathered for one does not carry over to the other. So the physician at RE:BERRY Gangnam reads the target tissue before choosing: a concern living in the dermis is matched to the monopolar RF protocol above, while soft-tissue fullness beneath the skin is a separate question answered by a deeper-reaching device on its own plan. Read this comparison as a map of which layer each treatment was built to serve. This information is for educational purposes only and is not medical advice.
SCIENTIFIC EVIDENCE
Science Monopolar RF dermal tightening — peer-reviewed references
The dermal side of this comparison rests on two decades of peer-reviewed evidence for monopolar radiofrequency. Zelickson (2004) documented immediate partial collagen fibril denaturation and subsequent new collagen expression in treated skin, establishing the two-phase mechanism. A multicenter periorbital trial of 86 subjects measured objective tissue elevation at six months (Fitzpatrick 2003), a 14-physician survey spanning 5,700 facial treatments reported visible tightening in the large majority of cases at six months under the multiple-pass, moderate-energy protocol (Dover 2007), and a dedicated lower-face study confirmed the same algorithm's progressive contour gains (Bogle 2007). Microwave lifting reaches a different, deeper layer, so this evidence base speaks specifically to the dermal, skin-quality result. That boundary is the reason a tissue reading comes first.
These references shape only the dermal, monopolar-RF half of the comparison at RE:BERRY's Gangnam aesthetic clinic: target-layer reading by the treating physician before any energy is delivered; the multiple-pass, moderate-energy technique applied across the treated dermis; and standardized-lighting photographic follow-up through the collagen-remodeling window under the same licensed physician. Where a concern lives in the deeper fat layer, it goes to a different device on its own plan. This information is for educational purposes only and is not medical advice.
Histological and ultrastructural evaluation of the effects of a radiofrequency-based nonablative dermal remodeling device: a pilot study
Zelickson BD, Kist D, Bernstein E, et al
Arch Dermatol. 2004;140(2):204-209
doi:10.1001/archderm.140.2.204
Multicenter study of noninvasive radiofrequency for periorbital tissue tightening
Fitzpatrick R, Geronemus R, Goldberg D, Kaminer M, Kilmer S, Ruiz-Esparza J
Lasers Surg Med. 2003;33(3):232-242
doi:10.1002/lsm.10225
Results of a survey of 5,700 patient monopolar radiofrequency facial skin tightening treatments: assessment of a low-energy multiple-pass technique leading to a clinical end point algorithm
Dover JS, Zelickson B; 14-Physician Multispecialty Consensus Panel
Dermatol Surg. 2007;33(8):900-907
doi:10.1111/j.1524-4725.2007.33191.x
Evaluation of the multiple pass, low fluence algorithm for radiofrequency tightening of the lower face
Bogle MA, Ubelhoer N, Weiss RA, Mayoral F, Kaminer MS
Lasers Surg Med. 2007;39(3):210-217
doi:10.1002/lsm.20472
Non-ablative skin tightening with radiofrequency in Asian skin
Kushikata N, Negishi K, Tezuka Y, Takeuchi K, Wakamatsu S
Lasers Surg Med. 2005;36(2):92-97
doi:10.1002/lsm.20136
Common Questions
Questions Guests Ask When Comparing Thermage FLX and Onda Lifting
What is the core difference between Thermage FLX and Onda lifting?
They heat different layers. Thermage FLX is monopolar radiofrequency that warms the dermis, the skin's own support layer, to firm and refine the surface. Onda lifting sends microwave energy deeper, into the subcutaneous fat, to reduce soft-tissue fullness. Thermage changes skin quality; Onda changes contour. The right choice depends on which layer your concern actually lives in.
Are Thermage FLX and Onda competitors, or can I have both?
You can have both. A jawline can lose definition because the skin above has slackened and the fat below has grown fuller at the same time, which is two layers and two problems. In that case the physician at RE:BERRY Gangnam stages Thermage FLX for the skin and Onda for the fat on separate visits, so each layer is treated without over-treating the other.
How do I know whether my concern is skin or fat?
The physician reads it by examining and gently pinching the area. If what moves is thin, loose skin, the dermis is the target and Thermage FLX fits. If what you feel is soft fullness that the skin merely drapes over, the fat layer is the target and Onda fits. This target-tissue reading comes before any device is named, since the layer drives the choice.
Which one should I pick for a softening jawline?
A softening jawline can come from two causes. If the edge has blurred because the skin has slackened, Thermage FLX firms that dermal layer. If it has blurred because of fullness beneath the skin, Onda addresses that fat layer. Many softening jawlines involve a bit of both, and those are the cases where the two get staged together.
Does either treatment involve downtime or injections?
Neither leaves a wound and neither requires injections for the energy delivery, so downtime is minimal on both paths. Mild warmth or pinkness fades within hours, and makeup, flights, and sightseeing are fine the same day. That is a common reason guests on short Seoul trips ask about both.
How soon do results appear, and how do they differ between the two?
On the Thermage FLX dermal path, early firmness shows within the first days and the main skin-quality change builds over roughly two to three months as collagen renews. On the Onda fat-layer path, contour softening settles over the first few weeks. One firms the surface, the other reduces contour, so the target layer guides the pick.
If I need both, can they be done in the same session?
No. Because they act on different layers, the physician at RE:BERRY Gangnam plans them on separate visits so neither layer is over-treated and each has room to develop. The sequence and spacing are set from your own tissue reading at consultation, and a single written figure is given before anything is scheduled.
Is Thermage FLX or Onda better for skin texture and pores?
Texture and pores are surface, dermal concerns, so Thermage FLX is the layer-appropriate choice; its heating firms and refines the skin envelope. Onda is aimed at deeper soft-tissue fullness and does not address texture and pores. Here the point about matching the layer, and not ranking the devices, is easy to see.
Are the devices at RE:BERRY genuine, and how do I verify?
Yes. The devices are genuine and officially registered. On the Thermage FLX path the sealed single-use tip is shown to you and confirmed before it is opened, so you can check the platform and the cartridge yourself. The same physician who reads your target layer performs the session and reads your review.
How long should I stay in Seoul to consider these treatments?
Because neither path has downtime, the assessment and a single-layer session can fit into one short visit, with same-day return to normal plans. If a two-layer plan is recommended, the physician will explain whether the second step can be scheduled on the same trip or is better spaced to a later visit.
Where is RE:BERRY, and how do I book a comparison consultation?
RE:BERRY is on Gangnam-daero, a short walk from Gangnam Station in Seoul, about 45-60 minutes from Incheon Airport. Message the clinic on WhatsApp with your concern, photos, and travel dates; a coordinator replies in English as soon as possible and reserves a physician slot for a target-tissue assessment. You can read more across the lifting treatments overview and the RE:BERRY blog.
Can Onda and Thermage FLX be done on different areas in the same period?
Yes, because they act on different tissues. A plan can assign Onda to areas where the concern is a fat-layer volume, such as under the chin or along the jawline, while Thermage FLX covers areas of dermal laxity like the cheeks or around the mouth. The target layers do not overlap, so treating different zones with each device in the same period comes down to scheduling and skin response, which the physician confirms at assessment.

















